Range Rover Evoque: Front seat heaters
Press the relevant button to operate the
required seat heater at high level. Three
indicators will illuminate.
Press a second time to heat the seat at a
medium level. Two indicators will illuminate.
Press a third time to heat the seat at the lowest
level. One indicator will illuminate.
Press a fourth time to switch off.
Note: Seat heaters consume a great amount of
battery power. They will operate only when the
engine is running.
READ NEXT:
- Press briefly to activate timed
recirculation. The button indicator
illuminates when recirculation is on.
- Press and hold the button to activate
latched recirculation. The button indicator
wil
- Press the AUTO button briefly to activate
timed recirculation. The AUTO LED will
illuminate. The system automatically
selects fresh and recirculated air
dependent on pollution and cabin
humidit
The climate control system removes moisture
from the air and deposits the excess water
beneath the vehicle. Puddles may form but this
is normal and is no cause for concern.
SEE MORE:
Engine Oil Draining and Filling
Draining
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the engine undershield.
Refer to: Engine Undershield (501-02 Front End Body Panels
Always run the engine during
prolonged
use of the touch screen. Failure to do so
may discharge the vehicle battery,
preventing the engine from starting.
Avoid spilling or splashing liquids onto
the touch screen.
Switching on
- Switch on the ignition.
- Switch on the touch screen.
The mos
© 2011-2024 Copyright www.rrevoque.org