Jeep Liberty: Flash Lamp With Lock - Personal Settings (Customer-Programmable Features) - Electronic Vehicle Information Center (EVIC) — If Equipped - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: Flash Lamp With Lock

When on is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter. This feature may be selected with or without the Sound Horn with Lock feature selected. To make your selection, press and release the SELECT button until “ON” or “OFF” appears.

    Sound Horn With Lock
    When on is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the Flash Lamp with Remote Key Lock feature. To m ...

    Headlamp Off Delay
    When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, press and release the SELECT ...

    See also:

    Warning and Indicator lights
    SRS (Airbag) Service Reminder Indicator (SRI) The SRS service reminder indicator (SRI) comes on for about 6 seconds after the ignition key is turned to the "ON" position or after th ...

    Heater operation
    Heating: This mode is used to direct heated air to the foot outlets. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control ...

    Operating the driver’s window (type A)
    Operating the driver’s window (type A) 1) Automatically open/close 2) Open/close To open: Press the switch down lightly and hold it. The window will open as long as the switch is held. Th ...