Jeep Liberty: Extreme Cold Weather (Below –20°F Or –29°C) - Starting Procedures - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Extreme Cold Weather (Below –20°F Or –29°C)

To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (available from your authorized dealer) is recommended.

    Normal Starting
    NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Turn the ignition switch to the START position and release when the engine ...

    If Engine Fails To Start
    WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal ...

    See also:

    Rear view camera (if equipped)
    Rear view camera (if equipped) A rear view camera is attached to the rear gate. When the ignition switch is “ON” and the shift lever (MT models) or select lever (AT models) is set to ...

    Driver’s Power Seat — If Equipped
    The power seat switch is located on the outboard side of the seat near the floor. Use this switch to move the seat up or down, forward or rearward or to tilt the seat. Power Seat Switch Adjust ...

    QR25DE engine
    1. Engine oil filler cap 2. Brake fluid reservoir 3. Air cleaner 4. Engine coolant reservoir 5. Window washer fluid reservoir 6. Engine drive belt location 7. Engine oil dipstick 8. Radi ...