Toyota RAV4: Engine (ignition) switch (vehicles with smart key system) - Driving procedures - When driving - Toyota RAV4 Owner's ManualToyota RAV4: Engine (ignition) switch (vehicles with smart key system)

Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes.

■ Starting the engine

The engine can be started in any mode by operating the “ENGINE START STOP” switch at the same time as depressing the brake pedal.

1 Check that the parking brake is set.
2 Check that the shift lever is set in P.
3 Sit in the driver’s seat and firmly depress the brake pedal. The “ENGINE START STOP” switch indicator turns green. If the indicator does not turn green, the engine cannot be started.

Press the “ENGINE START

Press the “ENGINE START STOP” switch. The engine will crank until it starts or for up to 30 seconds, whichever is less. Continue depressing the brake pedal until the engine is completely started. The engine can be started from any “ENGINE START STOP” switch mode.

■ Changing “ENGINE START STOP” switch mode

Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.)

1 OFF*

1 OFF*
The emergency flashers can be used.

2 ACCESSORY mode
Some electrical components such as the audio system can be used. 3 The “ENGINE START STOP”
switch indicator turns amber. 4 IGNITION ON mode
All electrical components can be used. The “ENGINE START STOP” switch indicator turns amber. *: If the shift lever is in a position other than P when turning off the engine, the “ENGINE START STOP” switch will be turned to ACCESSORY mode, not to OFF.

■Steering lock release

Make sure that the steering wheel lock is

Make sure that the steering wheel lock is released. To release the steering wheel lock, gently turn the wheel left or right while pressing the “ENGINE START STOP” switch. When the steering wheel lock does not release, the “ENGINE START STOP” switch indicator will flash green.

■If the engine does not start

The engine immobilizer system may not have been deactivated.

■When the “ENGINE START STOP” switch indicator flashes in amber

The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.

■Auto power off function

If the vehicle is left in ACCESSORY mode for more than an hour with the shift lever in P, the “ENGINE START STOP” switch will automatically turn OFF.

CAUTION
■When starting the engine
Always start the engine while sitting in the driver's seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury.

■Stopping the engine in an emergency
If you want to stop the engine in an emergency while driving the vehicle, push and hold the “ENGINE START STOP” switch for more than 3 seconds. However, do not touch the “ENGINE START STOP” switch while driving except in an emergency. Turning the engine off while driving will not cause loss of steering or braking control, but the power assist to these systems will be lost. This will make it more difficult to steer and brake, so you should pull over and stop the vehicle as soon as it is safe to do so.

NOTICE
■To prevent battery discharge
Do not leave the “ENGINE START STOP” switch in ACCESSORY or IGNITION ON mode for long periods without the engine running.

■When starting the engine
●Do not race a cold engine.
●If the engine becomes difficult to start or stalls frequently, have the engine checked immediately.

    Starting on a steep uphill
    1 Firmly set the parking brake and shift the shift lever to D. 2 Gently depress the accelerator pedal. 3 Release the parking brake. ■Driving in the rain ●Drive carefully when it is rai ...

    Engine (ignition) switch (vehicles without smart key system)
    ■ Starting the engine 1 Check that the parking brake is set. 2 Check that the shift lever is set in P. 3 Sit in the driver’s seat and firmly depress the brake pedal. 4 Turn the engine swit ...

    See also:

    Express Down Windows
    Windows that have the express&-down feature allow the windows to be lowered without holding the switch. Press the window switch fully and release it to activate the express&-down feature. ...

    My XC60
    MY CAR My XC60 The display shows all of the vehicle's driver support systems, which can be activated/ deactivated here. ...

    Fog Lamps
    To replace one of these bulbs: 1. Locate the fog lamp assembly under the front facia. 2. Disconnect the bulb socket from the electrical connector, turn, and pull out the bulb assembly. 3. Remov ...