Mercedes-Benz GLK-Class: Defrosting the windshield - Operating the climate control system - Climate control - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Defrosting the windshield

You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.

again. You should only select the defrosting function until the windshield is clear again.

  • Turn the SmartKey to position 2 in the ignition lock.
  • To activate: press the ¬ button. The indicator lamp in the ¬ button lights up.

The climate control system switches to the following functions:

  • cooling with air dehumidification on
  • high airflow
  • high temperature
  • air distribution to the windshield and front side windows
  • air-recirculation mode off

 

  • To switch off: press the button. The indicator lamp in the button. The indicator lamp in the selected settings come into effect again. The cooling with air dehumidification button goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Airrecirculation mode remains deactivated.

or

  • Press the lamp in the button goes out. Airflow button. The indicator lamp in the and air distribution are set to automatic mode. button goes out. Airflow and air distribution are set to automatic mode.

or

X Turn temperature control 1 or 8 clockwise or counter-clockwise ().

or

  • Press the button. or button.
    Activating/deactivating the MONO function
    This function is only available in vehicles for Canada. You can use the MONO function to adopt the temperature and air distribution settings on the driver's side for the front-passenger side. ...

    MAX COOL maximum cooling
    The MAX COOL function is only available in vehicles for the USA. MAX COOL is only operational when the engine is running. When you activate MAX COOL, climate control switches to the following functi ...

    See also:

    Setup
    To switch to system setup, you may say on of the following: • “Change to setup” • “Switch to system setup” • “Change to setup” • “Main menu setup” or • “Switch ...

    Memo
    To switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to record a new memo) — During the recording, you may press the Voic ...

    Opening and Closing the Hood
    1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. 2. Reach in between the ho ...