Range Rover Evoque: Bluetooth® information - Telephone - Land Rover Range Rover Evoque Owner's ManualRange Rover Evoque: Bluetooth® information

Bluetooth® is the name for

Bluetooth® is the name for short-range radio frequency (RF) technology that allows electronic devices to communicate wirelessly with each other.

The Land Rover Bluetooth® system supports Bluetooth® Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP) and Audio Video Remote Control Profile (AVRCP).

Note: HFP and A2DP/AVRCP profiles can be connected independently, so a phone can be connected via one, while a media device can be connected via the other, at the same time.

Before making use of the vehicle’s Bluetooth phone system, your Bluetooth phone must be paired and connected to the vehicle system.

This is done using one of two methods; via your phone to the vehicle or from the touch screen to your phone. If one of these methods is not successful, try the other option.

Each time the ignition is switched on the system will attempt to connect with the last connected phone.

As mobile phones have a wide range of audio and echo characteristics, it may take a few seconds for the vehicle system to adapt and deliver optimum audio performance. To achieve this, it may be necessary to reduce the in-vehicle volume and ventilation fan speed slightly.

    Telephone
    ...

    Telephone compatibility
    Please refer to the Ownership section of the Land Rover website at www.landrover.com, for a list of compatible phones. Note: The Bluetooth® equipped phones listed on Landrover.com, have been test ...

    See also:

    Center console controls
    Center console controls for menu navigation 1 Press MY CAR to access the My Car menus. 2 Press OK/MENU to select a highlighted selection or to store a certain function in the system's memory ...

    Trailer brakes
    - Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight. - Do not directly connect your trailer’s hydraulic brake system to t ...

    Activating Around View Monitor
    Selector lever operation: - When the selector lever is shifted into the “R” (Reverse) position (1 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is ...