Controls. Vehicle Messages. Battery Voltage and Charging Messages">

GMC Terrain: Battery Voltage and Charging<span lang= Messages - Vehicle Messages - Instruments and Controls - GMC Terrain Owner's Manual" border="0" width="100" align=right style="margin: 0px 3px 0 3px">GMC Terrain: Battery Voltage and Charging Messages

BATTERY SAVER ACTIVE

This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing certain features of the vehicle that you may be able to notice. At the point that features are disabled, this message is displayed. It means that the vehicle is trying to save the charge in the battery. Turn off unnecessary accessories to allow the battery to recharge.

LOW BATTERY

This message is displayed when the battery voltage is low. See Battery on page 10‑26 for more information.

SERVICE BATTERY CHARGING SYSTEM

This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.

    Vehicle Messages
    Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may a ...

    Brake System Messages
    BRAKE FLUID LOW This message is displayed when the brake fluid level is low; see Brake Fluid on page 10‑24. RELEASE PARKING BRAKE This message is displayed as a reminder that the parking br ...

    See also:

    Voice Control System
    The audio system can also be operated by voice control. See the navigation system manual for complete details. ...

    Folding the exterior mirrors in or out automatically
    This function is only available in vehicles for Canada. If the "Fold in mirrors when locking" function is activated in the on-board computer (): the exterior mirrors fold in automatic ...

    Setting the clock
    To set the time, press CLOCK. The display will read SET TIME. Use the memory preset numbers (0–9) to enter in the desired time–hours and minutes and press OK. The clock will then begin from that ...