Jeep Liberty: Barge In — Overriding Prompts
The “Voice Command” button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking “Would you like to pair a phone, clear a...,” you
could press the 
button and say,
“Pair a Phone” to
select that option without having to listen to the rest of
the voice prompt.
Working With Automated Systems
This method is used in instances where one generally has
to press numbers on the mobile phone keypad while
navigating through an automated telephone system.
You can use your Uconnect™ Phone to ...
Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnect™
Phone will not repeat a phone number before you dial it).
• Press the button to begin. ...
See also:
Recommended Fuel
Use regular unleaded gasoline with a posted octane rating of 87 or higher. If
the octane rating is less than 87, an audible knocking noise, commonly referred
to as spark knock, might be heard when ...
Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be obstructing the windshield wiper movement.
The wiper motor has been deactivated.
For safety reasons, you should remove t ...
Dolly Towing (Front-Wheel&- Drive Vehicles)
To tow the vehicle from the front with the rear wheels on the ground, do the
following:
1. Put the front wheels on a dolly.
2. Move the shift lever to P (Park)..
3. Set the parking brake..
4. ...
