Jeep Liberty: Automatic Transmission - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Automatic Transmission

Brake Master Cylinder
The fluid in the master cylinder should be checked when performing under hood services or immediately if the “Brake Warning Light” is illuminated. Be sure to clean the top of the master cylin ...

Selection Of Lubricant
It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only manufacturer’s recommended transmission fluid. Refer to “Fluids, Lub ...

See also:

Interior lights
Room light Front (map light) The lights are turned ON or OFF by pressing the corresponding switch. Center (dome light) ➀ DOOR : The light turns on or off when a door is opened or close ...

Low tire pressure warning light (U.S.-spec. models)
When the ignition switch is turned to the “ON” position, the low tire pressure warning light will illuminate for approximately 2 seconds to check that the tire pressure monitoring syst ...

Trailer Sway Control (TSC)
The vehicle has a Trailer Sway Control (TSC) feature as part of the StabiliTrak system. If TSC detects that the trailer is swaying, the vehicle's brakes are automatically applied. When TSC ...