Volvo XC60: Auto-brake - Function - Collision warning with Full Auto-brake and Pedestrian Detection - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Auto-brake

If a collision is imminent and the driver has not applied the brakes or begun to steer around the vehicle or pedestrian, the auto-brake function is activated without the driver pressing the brake pedal. Full brake force is applied to help reduce the vehicle’s speed when the collision occurs or limited brake force is applied if this is sufficient to avoid the collision.

NOTE
The auto-brake and brake support functions are always on and cannot be turned off.

    Brake Support
    If the risk of collision continues to increase after the collision warning has been given, Brake Support is activated. Brake Support prepares the brake system to react quickly, and the brakes ...

    Operation
    Settings are made by pressing MY CAR on the center console control panel and using the menus displayed. ...

    See also:

    Refrigerant for your climate control system
    Your air conditioner uses ozone friendly refrigerant HFC134a. Therefore, the method of adding, changing or checking the refrigerant is different from the method for CFC12 (freon). Consult your ...

    Coolant
    Location of the coolant reservoir Normally, the coolant does not need to be changed. If the system must be drained, consult a trained and qualified Volvo service technician. See page 357 for i ...

    Steering Wheel Adjustment
    To adjust the steering wheel: 1. Pull the lever (A) down. 2. Move the steering wheel up or down. 3. Pull or push the steering wheel closer or away from you. 4. Pull the lever (A) up to lock the ...