Jeep Liberty: Answer Or Reject An Incoming Call — No Call Currently In Progress
When you receive a call on your mobile phone, the
Uconnectâ„¢ Phone will interrupt the vehicle audio system,
if on, and will ask if you would like to answer the
call. Press the 
button to accept
the call. To reject the
call, press and hold the button
until you hear a single
beep, indicating that the incoming call was rejected.
Phone Call Features
The following features can be accessed through the
Uconnectâ„¢ Phone if the feature(s) are available on your
mobile service plan. For example, if your mobile service
plan provides three-way call ...
Answer Or Reject An Incoming Call — Call Currently In Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
mobile phone. Press the butto ...
See also:
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm have a cover for protection. The cover must
be removed before the wiper blade can be replaced. To remove the cover:
1. Slide a plastic tool under the cover and ...
To Exit Remote Start Mode And Drive The Vehicle
Before the end of the 15-minute cycle, press and release
the UNLOCK button on the RKE transmitter to unlock
the doors and disarm the Vehicle Security Alarm (if
equipped). Then, insert the key in ...
Key battery depletion
Vehicles without smart key system
If the wireless remote control function does not operate, the battery may be
depleted. Replace the battery when necessary.
Vehicles with smart key system ...
