Mercedes-Benz GLK-Class: Activating the rear view camera
- Make sure that the SmartKey is in position 2 in the ignition lock.
- Make sure that the "rear view camera" function is selected in COMAND (see the separate operating instructions for COMAND).
- Engage reverse gear. The area behind the vehicle is shown in the COMAND display with guide lines.
View through the camera
The area behind the vehicle is displayed in a mirror-inverted manner, as in the rear-view mirror. WARNING The rear view camera is only an aid and may display obstacles from a distorted pe ...Guide lines in the COMAND display
WARNING Use of rear view camera can be dangerous if you are color-blind or have impaired color vision. Only use rear view camera if you can see and distinguish all colored guidelines shown ...See also:
When “NO USB” is displayed (type D audio)
This message is displayed under the
following conditions.
- No USB storage devices/iPod® are
connected.
- A non-connectable USB storage device/
iPod® is connected.
Connect a connectable USB ...
If your vehicle needs to be towed
If towing is necessary, we recommend having your vehicle towed by
your Toyota dealer or a commercial towing service, using a wheel-lift
type truck or a flat bed truck.
Use a safety chain system for ...
Installing the towing eye
Vehicles with a trailer tow hitch: if possible, secure the towing device on the
trailer tow hitch ().
X Remove the towing eye from the vehicle tool kit ().
WARNING
The exhaust tail pipe may ...