Suzuki Grand Vitara: “ESP OFF” Switch - Instrument Panel - Suzuki Grand Vitara Owner's ManualSuzuki Grand Vitara: “ESP OFF” Switch

ESP® is a registered trademark of DaimlerChrysler AG. The “ESP OFF” switch is
“ESP OFF” Switch

ESP® is a registered trademark of DaimlerChrysler AG. The “ESP OFF” switch is located on the center of the instrument panel. You can turn the ESP® systems (other than ABS) on or off using this switch. To turn off the ESP® systems (other than ABS), push and hold the “ESP OFF” switch until the “ESP OFF” indicator light comes on. To turn on all of the ESP® systems, push the “ESP OFF” switch again. The “ESP OFF” indicator light will go out.

NOTE:
• If the vehicle speed is greater than approximately 30 km/h (19 mph), the ESP® systems (other than ABS) will turn on automatically.
• If the transfer switch (if equipped) is turned to the “4L LOCK” position, the ESP® systems (other than ABS) will be canceled automatically.
• If the ESP® systems operates continuously, such as when driving on slippery roads, the traction control functions of the ESP® systems may be canceled temporarily to avoid overheating the brake pads. After a short period of time, the ESP® systems (other than ABS) will turn on automatically and the “ESP OFF” indicator light will go out.

For details of the ESP® systems, refer to “Electronic Stability Program (ESP®)” in the “OPERATING YOUR VEHICLE” section.

    Front Fog Light Switch (if equipped)
    Front Fog Light Switch (if equipped) The front fog light comes on when the fog light switch is pushed in with: • the lighting switch turned to the third position and the beams set to the low ...

    Transfer Switch (if equipped)
    Transfer Switch (if equipped) The transfer switch is located on the center of the instrument panel. For details on how to use this switch, refer to “Using the Transfer Switch” in the “OPER ...

    See also:

    Washing the Vehicle
    To preserve the vehicle's finish, wash it often and out of direct sunlight. Notice: Do not use petroleum based, acidic, or abrasive cleaning agents as they can damage the vehicle's paint, m ...

    Connecting procedure
    NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Push the button on t ...

    Selecting songs
    Turn or press “∧” or “∨” on to select the desired song. ...